Product Overview
Keencut’s extensive range of cutter bars offer a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. Whether used alone as a moveable unit, with the optional Lift & Hold mechanisms or in conjunction with the Keencut BIG bench these simple no-nonsense cutter bars offer an ingenious cutting solution that is safe for both product and people.
All cutter bars share the same cutting head that features a blade depth adjustment as standard and safely retracts the blade when not in use. Standard utility blades will cut to a depth of 10mm (0.4”) and special long reach blades will cut 13mm (0.5”). The patented linear bearings have been test run under load for 1600km (1000 miles) with the result that they are guaranteed for 20 years, two full length silicon rubber grip strips on the underside ensures all work is held perfectly in place while cutting and provides protection for the most sensitive of surfaces. All cutter bars can be lifted and stored safely on the wall brackets provided.
To use alone, simply place the cutter bar on the material to be cut, align it with the image registration crop marks, depress the cutting head and push or pull it along to cut.