Home arrow Finishing arrow Keencut Cutters arrow Cutter Bars - Sabre arrow Product Overview
 Contact Sales for Cutter Bars   
  • Available in 5 sizes
  • Ideal for Vinyl, Plastic Board, Cardboard, PVC.
  • Cut depth up to 13mm
  • Engineered for volume production
  Contact Sales for Cutter Bars
 
 

 Cutter Bars - Sabre - 100/150/200/250/300 cm

Product Overview

Keencut’s extensive range of cutter bars offer a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. Whether used alone as a moveable unit, with the optional Lift & Hold mechanisms or in conjunction with the Keencut BIG bench these simple no-nonsense cutter bars offer an ingenious cutting solution that is safe for both product and people.

All cutter bars share the same cutting head that features a blade depth adjustment as standard and safely retracts the blade when not in use. Standard utility blades will cut to a depth of 10mm (0.4”) and special long reach blades will cut 13mm (0.5”). The patented linear bearings have been test run under load for 1600km (1000 miles) with the result that they are guaranteed for 20 years, two full length silicon rubber grip strips on the underside ensures all work is held perfectly in place while cutting and provides protection for the most sensitive of surfaces. All cutter bars can be lifted and stored safely on the wall brackets provided.

To use alone, simply place the cutter bar on the material to be cut, align it with the image registration crop marks, depress the cutting head and push or pull it along to cut.

Superbly styled, the Sabre is essentially a Practik cutter bar with it’s own integral base. The extruded and silver anodised aluminium base incorporates a narrow groove to accept the blade tip when cutting, a full length silicon rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting and provides protection for even the most sensitive surfaces.

The innovative hinge and lift arm mechanism not only makes it possible to cut materials which are longer than the length of the cutter, it allows the Sabre to accept materials up to 13mm (0.5”) without affecting either the line or angle of cut, the latter always remaining perfectly vertical.

Efficiently engineered for volume production, the Sabre offers the same cutting capacities as the Practik and embodies the highest standards of design excellence combined with outstanding value for money


  1.0
KS01
1.5
KS02
2.0
KS03
2.5
KS04
3.0
KS05
 A cm (") 100 (40) 150 (60) 200 (80) 250 (100) 300 (120)
B cm (") 117 (46) 167 (65.75) 217 (85.5) 267 (105.25) 317 (124.75)
Dimensions
  

Cutter Bars

 
 IDEAL FOR CUTTING

  • PVC Foamboard up to 6mm (0.25”)
  • Foam centred board up to 13mm (0.5”) *
  • Honeycomb and corrugated plastics
  • Vinyl and Plastic film
  • Cardboard
  • Corrugated cardboard
    **10mm (0.4”) with standard blade, 13mm (0.5”)
    with long reach blade.
  • IDEAL FOR SCORING

    Acrylics and Perspex **


  • ** Using optional scoring blade.

  •  


     

    Shopping Cart

      View Cart
    EPSON 3 Year Warranty
    Great Value Banner Stands




    Satin Photo Paper