Home arrow Finishing arrow Keencut Cutters arrow Cutter Bars - BigBench arrow Product Overview
 Contact Sales for BigBench   
  • Available in 9 sizes
  • Designed for Javelin, Practrik and MAX
  • Work is held perfectly in place while cutting
  • Individual level adjustment on each leg
  Contact Sales for BigBench
 
 

 Cutter Bars - Big Bench - in 9 Sizes

Product Overview

Keencut’s extensive range of cutter bars offer a standard of straight, square and clean cutting that is impossible to achieve with a craft knife and straight edge. Whether used alone as a moveable unit, with the optional Lift & Hold mechanisms or in conjunction with the Keencut BIG bench these simple no-nonsense cutter bars offer an ingenious cutting solution that is safe for both product and people.

All cutter bars share the same cutting head that features a blade depth adjustment as standard and safely retracts the blade when not in use. Standard utility blades will cut to a depth of 10mm (0.4”) and special long reach blades will cut 13mm (0.5”). The patented linear bearings have been test run under load for 1600km (1000 miles) with the result that they are guaranteed for 20 years, two full length silicon rubber grip strips on the underside ensures all work is held perfectly in place while cutting and provides protection for the most sensitive of surfaces. All cutter bars can be lifted and stored safely on the wall brackets provided.

To use alone, simply place the cutter bar on the material to be cut, align it with the image registration crop marks, depress the cutting head and push or pull it along to cut.

BigBenchBigBenchBigBench


The combination of the BIG bench with the choice of Keencut’s Javelin, Practik or Max cutter bars creates the ultimate precision cutting table.

The stability of the BIG bench, with individual level adjustment on each leg, provides a firm and flat work surface to ensure extreme accuracy and the integral Lift and Hold mechanism enables the largest work to be aligned and trimmed singlehanded. The Cutter Bars can be lifted and stored safely on wall brackets if the table is needed for other tasks and re-installation is simple using the precise built in location devices, no tools are required.

The aluminium table edge extrusion incorporates a cutting base with a narrow groove to accept the blade tip while cutting, an accurate metric/imperial measuring scale is fitted as standard and a full length silicon rubber grip strip mounted in the surface of the table edge ensures all work is held perfectly in place while cutting and protects the most sensitive surfaces.

The edge of the table extrusion accepts optional clip on support arms to increase the effective working area just when it is needed.

Supplied flat-packed, self assembly is simple and as part of Keencut’s Proteus range of workplace equipment the BIG bench can be extended and added to at any time.

 


BigBenchBigBenchBigBench

BigBench

  1.0
KB01
1.5
KB02
2.0
KB03
2.5
KB04
3.0
KB05
3.5
KB06
4.0
KB07
4.5
KB08
5.0
KB09
A cm (") 125 (49) 175 (69) 225 (88) 275 (108) 325 (128) 380 (149.75) 430 (169.5) 480 (189) 530 (208.75)
B cm (") 115 (45) 165 (65) 215 (84.50) 265 (104) 315 (124) 370 (145.75) 420 (165.5) 470 (185) 520 (204.75)
  Bigbench
 
 


 

Shopping Cart

  View Cart
Roll Up Banner Stands


Satin Photo Paper
New Technology